Preparing Your Sprinklers for Winter

Preparing your Sprinklers for winter should begin the day before Thanksgiving. It is important to do this so you will have time to thaw them out and clean them before you start using them for the next month. You should drain the water out of your sprinkler heads and put your sprinkler pipes in the sink, along with any nozzles or valves you may have removed. This will give you enough time to thaw the pipes and clean them properly. Be sure to put them all back together so they are not one big mess when you are done. If you have an automatic sprinkler system, you will also need to drain it before you prepare your Sprinklers for winter.

You will notice that there will be a lot of build up around your pipes and nozzles once you drain them. This is normal and expected, but do not ignore it. This will attract more dirt and debris and could cause your pipes to clog and malfunction. If you see this happening to your sprinkler system, you should call a professional to help you. You will also want to remove any and all debris from your gutters near your home so they will not freeze over.

You will find that you need to make some minor repairs and adjustments to your sprinkler head and controls in order to operate as smoothly as possible throughout the season. Most people tend to think that they will have to replace the whole system when something goes wrong, but this is rarely the case. If anything does go wrong, you can usually fix it yourself, if you have some knowledge. If you do not know what to do, however, you should contact someone who is more than qualified to help you.

One area that you should focus on when you are troubleshooting your sprinkler is the valve trim. If you find that there is something wrong with the trimmer, you should check to see if the valves are also worn. Sometimes the trimmer will turn off by itself and then on by itself. You should make sure both valves are working properly. It could be an indication that there is a leak somewhere in your system.

Another thing that you should look at closely when troubleshooting your sprinkler system is the rain barrel and gutter. If your rain barrel becomes clogged with leaves and other debris, it could be due to leaf slugs. These creatures are invisible to the naked eye, but they can quickly eat through anything. It is wise to clear away any existing debris from your rain barrel and gutter before you apply any type of treatment to your sprinkler system.

Your heater should also be checked during this time. If your heater seems to be functioning properly, you may not have to worry about it freezing in the winter. The problem with the heater could be something as simple as a bad thermostat. If your heater is not functioning at optimal temperature, you may need to replace it with a model that will be better able to keep up with the extreme temperatures this winter.

Another important part of your system that you will want to pay close attention to is your valves. Make sure all of the valves are in good working order. There should be no leaks or missing valves anywhere on your sprinkler system. In addition, you should have any faulty valves replaced by a professional right away to ensure you do not end up with a dangerous situation.

Preparing your sprinklers for winter will help you avoid unnecessary water damage in the winter. When you do so, you can be sure that you and your home will be much more comfortable. You will also be able to enjoy your lawn and garden throughout the cold months. Keep these tips in mind the next time you are troubleshooting your sprinklers.